{"id":16411,"date":"2019-01-15T12:12:06","date_gmt":"2019-01-15T04:12:06","guid":{"rendered":"https:\/\/www.siruba.com\/?p=16411"},"modified":"2019-01-15T17:10:23","modified_gmt":"2019-01-15T09:10:23","slug":"vc008faq","status":"publish","type":"post","link":"https:\/\/siruba.cn\/en\/vc008faq\/","title":{"rendered":"VC008FAQ"},"content":{"rendered":"\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t

SUPPORTS <\/h2>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
    \n\t\t\t\t\t\t\t
  • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/i>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t--Needle is broken<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t<\/ul>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tcheck\uff1a<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t
    1. The specification of the needle is not suitable for the materials<\/span>
      <\/span><\/li>
    2. The needle is wrongly assembled.<\/span>
      <\/span><\/li>
    3. One of the adjustmens of the needle\/looper\/thread wiper is incorrect.<\/span>
      <\/span><\/li>
    4. The pulling roller (VCL) does not cooperate with the feed dog.<\/span>
      <\/span><\/li>
    5. The presser foot is rubbing against the needle.<\/span>
      <\/span><\/li>
    6. The feed dog height is not enough.<\/span>
      <\/span><\/li>
    7. The height of the needle bar is too low.<\/span>
      <\/span><\/li>
    8. The thread is too thick or having bad quality.<\/span><\/li>
    9. The needle doesn’t go through the needle plate hole correctly.<\/span><\/li><\/ol><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
      \n\t\t\t\t
      \n\t\t\t\t\t
        \n\t\t\t\t\t\t\t
      • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/i>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t--Noise\t<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t<\/ul>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
        \n\t\t\t\t
        \n\t\t\t\t\t
        \n\t\t\t\t\t\t\t
        \n\t\t\t\t\t
        \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tcheck\uff1a<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

        1.The feed dog has touched the needle plate.<\/span>
        <\/span>2.The VB14 and VB07 are not assembled well.<\/span>
        <\/span>3.The thread wiper runs into the feed dog.<\/span>
        <\/span>4.The left\/right positions of the VD31 are incorrect.<\/span>
        <\/span>5.The preeser foot doesn’t stay on the needle plate flatly and well.<\/span><\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

        \n\t\t\t\t
        \n\t\t\t\t\t
          \n\t\t\t\t\t\t\t
        • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/i>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t--Skipped stitch<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t<\/ul>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
          \n\t\t\t\t
          \n\t\t\t\t\t
          \n\t\t\t\t\t\t\t
          \n\t\t\t\t\t
          \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tcheck\uff1a<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t
          1. The needle size is not right.<\/span>
            <\/span><\/li>
          2. The needle is bent or has burrs.<\/span>
            <\/span><\/li>
          3. The timing of needle\/looper\/thread wiper is incorrect.<\/span>
            <\/span><\/li>
          4. The position relation between needle and needle guard is incorrect.<\/span>
            <\/span><\/li>
          5. The quality of thread is poor.<\/span>
            <\/span><\/li>
          6. The threading quantity of VF18 is not enough.<\/span>
            <\/span><\/li>
          7. The timing of VE06 is incorrect.<\/span>
            <\/span><\/li>
          8. The pressure of thread control knob is incorrect.<\/span>
            <\/span><\/li>
          9. The speed of the puller is incorrect.<\/span>
            <\/span><\/li>
          10. The position of VK13 is incorrect.<\/span>
            <\/span><\/li>
          11. Incorrect threading.<\/span>
            <\/span><\/li>
          12. The timing relationship of looper is incorrect.<\/span>
            <\/span><\/li>
          13. The clearance between the needle guard and the needle is too wide.<\/span>
            <\/span><\/li>
          14. Improper pressure adjustment of the presser foot.<\/span><\/li><\/ol><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
            \n\t\t\t\t
            \n\t\t\t\t\t
              \n\t\t\t\t\t\t\t
            • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/i>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t--Thread broken<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t<\/ul>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
              \n\t\t\t\t
              \n\t\t\t\t\t
              \n\t\t\t\t\t\t\t
              \n\t\t\t\t\t
              \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tcheck\uff1a<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t
              1. The needle is bent or uneven.<\/span>
                <\/span><\/li>
              2. Poor quality of the thread or uneven thread.<\/span>
                <\/span><\/li>
              3. The looper rubs against the needle.<\/span>
                <\/span><\/li>
              4. The timing of needle\/looper\/thread wiper is incorrect.<\/span>
                <\/span><\/li>
              5. The threading quantity of VF18 is not enough.<\/span>
                <\/span><\/li>
              6. The thread control knob is too tight.<\/span>
                <\/span><\/li>
              7. Incorrectly threading.<\/span>
                <\/span><\/li>
              8. Improper adjustment of the <\/span>looper thread.<\/span>
                <\/span><\/li>
              9. Inappropriate left and right adjustments of the needle\/looper\/thread wiper.<\/span>
                <\/span><\/li>
              10. Sewing starts before the fabrics are fed completely under the presser foot.<\/span>
                <\/span><\/li>
              11. The needle doesn’t go through the needle plate hole correctly.<\/span><\/li><\/ol><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                \n\t\t\t\t
                \n\t\t\t\t\t
                  \n\t\t\t\t\t\t\t
                • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/i>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t--The sewing is not smooth\t<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t<\/ul>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
                  \n\t\t\t\t
                  \n\t\t\t\t\t
                  \n\t\t\t\t\t\t\t
                  \n\t\t\t\t\t
                  \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tcheck\uff1a<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t
                  1. The height of the feed dog doesn’t match the fabrics.<\/span>
                    <\/span><\/li>
                  2. Improper pressure adjustment of <\/span>the presser foot.<\/span>
                    <\/span><\/li>
                  3. The timing adjustment of the puller is inappropriate.<\/span>
                    <\/span><\/li>
                  4. The lower surface of the presser foot is worn or not smooth.<\/span>
                    <\/span><\/li>
                  5. The feed dog is worn or doesn’t keep horizontally.<\/span>
                    <\/span><\/li>
                  6. The chosen needle is not suitable for the sewing fabrics.<\/span>
                    <\/span><\/li>
                  7. There are burrs on the gear puller<\/span>
                    <\/span><\/li>
                  8. The pressure of the puller is too strong or too weak.<\/span>
                    <\/span><\/li>
                  9. The clearance between the upper and the lower puller is not correct,<\/span>or the two puller are not parallel to each other.<\/span>
                    <\/span><\/li>
                  10. The roller VCL33 doesn’t function well.<\/span>
                    <\/span><\/li>
                  11. Inappropriate pressure adjustment of the thread control knob.<\/span>
                    <\/span><\/li>
                  12. Inappropriate pressure adjustment of the rear puller.<\/span><\/li><\/ol><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

                    SUPPORTS –Needle is broken check\uff1a The specification of the needle is not suitable for the materials The needle is wrongly assembled. One of the adjustmens of the needle\/looper\/thread wiper is incorrect. The pulling roller (VCL) does not cooperate with the feed dog. The presser foot is rubbing against the needle. The feed dog height is […]<\/p>\n","protected":false},"author":11,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"elementor_canvas","format":"standard","meta":[],"categories":[293],"tags":[],"acf":[],"_links":{"self":[{"href":"https:\/\/siruba.cn\/wp-json\/wp\/v2\/posts\/16411"}],"collection":[{"href":"https:\/\/siruba.cn\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/siruba.cn\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/siruba.cn\/wp-json\/wp\/v2\/users\/11"}],"replies":[{"embeddable":true,"href":"https:\/\/siruba.cn\/wp-json\/wp\/v2\/comments?post=16411"}],"version-history":[{"count":0,"href":"https:\/\/siruba.cn\/wp-json\/wp\/v2\/posts\/16411\/revisions"}],"wp:attachment":[{"href":"https:\/\/siruba.cn\/wp-json\/wp\/v2\/media?parent=16411"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/siruba.cn\/wp-json\/wp\/v2\/categories?post=16411"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/siruba.cn\/wp-json\/wp\/v2\/tags?post=16411"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}